Sometimes called wall lights, these items can be fitted easily in any room, mostly in a lounge or dinning rooms, nothing to stop you fitting them elsewhere and with a little planning can replace your old wall lights, because a normal bulb housing will be concealed, item which will cast the lighting upwards. (Max 60watt bulb). = "0 Fire rated"

Manufactured in our own factory using time long traditional methods of casting, passed on from one generation to another and using our own special blend of Gypsum plasters.
All our products are reinforced with Hessian scrim which entraps Wooden laths for extra strength and fixing properties.

Our mouldings are truly a piece of heritage worth holding on to in today's World.

The Cornice Page
One of the largest ranges of "Cornice" available.
You can have any design to suite your home you wish, not forgetting that we can manufacture your very own designed Cornice "see Specials" page.


As a helpful guide you will find the recommened height for each Cornice, if you click"Details" however is also possible to increase the apperence of a "Cornice" you like, by means of fitting a "panel moulding" near to the cornice (on either Ceiling or Wall area, or both)

One of the most luxuries and sought items entirely designed and produced by us down to the last detail, we have made the following pages so that you can now cost out very easily the price of your Archway after entering the measurements of your opening in the boxes below.

These small strips of ornate plaster are used in many many ways including: fix on the ceiling or wall or both. with or without corners related to the product to form a panel/s, or near or next to a Coving to increase the visual appearance, also used as a picture rail or a dado rail.

You are also just a phone call away from help.

Our range of Corbels allows you to be creative, use them for fixing under a beam, shelve, door opening or of cause for sitting under an Archway.
Do not worry if you don't see one with the correct measurements to suit your needs, as we can produce a model product (Code CL514) with wall sizes increasing in increments of 1" to your wall thickness requirements.

A selection of adhesives, mitre blocks and enrichments

You can order half or full Columns AR805 = full column, AR806 = half column

The following items are made of a mixture of plasters, reinforced with wooden laths & Hessian scrim, some of which will need a recess/hole cutting into the wall (Normally 1 brick thickness) prior to fitting, please note: if the item states: (flush mounted) then there is no need for a hole to be cut.

Please also note: that some of these products may require to be fitted by a competent person or qualified tradesperson, as it may involve building work or electrical work and you should adhere to current Building Regulations in your area.
You can download a copy "Building Regulations Explanatory Booklet" by viewing "niches and click "Building Regs".